Model 66 - 08/04/2013
test model 66 op3 - solution file.
test model 66 - associated build files.
Solve Time = 52 hours.
Magnet Configuration: Step VI Flip Mode - 240MeV/c - No return yoke.
As model 56 but also see notes for model 61
Model 65 - 08/04/2013
test model 65 op3 - solution file.
test model 65 - associated build files.
Solve Time = 48 hours.
Magnet Configuration: Step IV Flip Mode - 240MeV/c - With return yoke.
As model 55 but also see notes for model 61
Model 64 - 08/04/2013
test model 64 op3 - solution file.
test model 64 - associated build files.
Solve Time = 59 hours.
Magnet Configuration: Step IV Flip Mode - 240MeV/c - No return yoke.
As model 54 but also see notes for model 61
Model 63 - 22/03/2013
test model 63 op3 - solution file.
test model 63 - associated build files.
Solve Time = 39 hours.
Magnet Configuration: Step VI Solenoid Mode - 240MeV/c - No return yoke.
As model 53 but also see notes for model 61
Model 62 - 08/04/2013
test model 62 op3 - solution file.
test model 62 - associated build files.
Solve Time = 51 hours.
Magnet Configuration: Step IV Solenoid Mode - 240MeV/c - With Holger's return yoke.
As model 52 but also see notes for model 61
Model 61 - 19/03/2013
test model 61 op3 - solution file.
test model 61 - associated build files.
Solve Time = 60 hours.
Magnet Configuration: Step IV Solenoid Mode - 240MeV/c - No return yoke.
As model 51 but the boundary conditions have now been set as total potential. The boundary is now slightly further out than before. The boundary use to be a distance of outer_air x 1.02, it is now outer_air x 1.2.
Quad Sub Model 05 - 15/03/2013
Quad Sub Model 05 op3 - solution file.
Quad Sub Model 05 - associated build files.
Solve Time = 23 hours.
Magnet Configuration: Step IV Solenoid Mode - 240MeV/c - No return yoke.
As Quad model 02 but with Normal boundary conditions.
Quad Sub Model 04 - 07/03/2013
Quad Sub Model 04 op3 - solution file.
Quad Sub Model 04 - associated build files.
Solve Time = 116 hours.
Magnet Configuration: Step IV Solenoid Mode - 240MeV/c - No return yoke.
Quad model 02 with increased mesh resolution (mesh/4^(1/3)). The model is being run for mesh convergence testing.
08/03/2013 Committed comi code to Launchpad Repository via Bazaar. Revision 20. (Quad Sub Model 04)
Quad Sub Model 03 - 07/03/2013
Quad Sub Model 03 op3 - solution file.
Quad Sub Model 03 - associated build files.
Quad Sub Model 03 - comi snapshot.
Solve Time = 45 hours.
Magnet Configuration: Step IV Solenoid Mode - 240MeV/c - No return yoke.
Quad model 02 with increased mesh resolution (mesh/2^(1/3)). The model is being run for mesh convergence testing.
Quad Sub Model 02 - 07/03/2013
Quad Sub Model 02 op3 - solution file.
Quad Sub Model 02 - associated build files.
Solve Time = 22 hours.
Magnet Configuration: Step IV Solenoid Mode - 240MeV/c - No return yoke.
New Baseline model with slightly extended air boundary - shouldn't make much difference.
Quad Sub Model 01 - 04/03/2013
Quad Sub Model 01 op3 - solution file.
Quad Sub Model 01 - associated build files.
Solve Time = 14 hours.
Magnet Configuration: Step IV Solenoid Mode - 240MeV/c - No return yoke.
Quad Sub-model 01 contains the NSW, SSW, Virostek Plates, TOF Plate, EMR, Q9 to Q7 with baseplates. This has been run at the same meshing resolution as model 51 so as to provide a direct comparison. The results in the vicinity of the quads should be comparable if the outer structures are irrelevant.